Application
BE-SEG-02
Special characteristics
Variants
Parts and characteristics
Useful additions
Construction features
Materials and surfaces
The Type BE-SEG-02 and BE-SEG-03 control panels are used to display and control the most critical aerodynamic and safety-related functions of a fume cupboard. Users obtain information regarding the condition of the fume cupboard and can set various operating modes. The individual display elements and controls are as follows:
BE-SEG-02
BE-SEG-03
The range of functions of the control panel can be adapted to project-specific requirements using the EasyConnect configuration software. The range of functions may vary for different fume cupboards.
The function button fields are used for display and for operation. The available functions are highlighted in blue.
A required function can be selected by pressing the corresponding button.
The selected, active function is highlighted in white.
The OLED display (BE-SEG-02 only) shows system messages or, if enabled, the actual face velocity or volume flow rate.
Supply voltage | 24 V DC from the controller TCU3 |
Connecting cable | Approx. 5 m standard network patch cable, SF-UTP, extendable to 40 m |
Operating temperature | 0 – 50 °C |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 41 for surface mounting, IP 42 for flush mounting |
Dimensions | 23 × 306.4 × 6.4 (without wire clamping bracket) |
EC conformity | EMC according to 2004/108/EC |
Weight | 0.130 kg |
Fume cupboard control panels with adaptable status display for the EASYLAB system, used to display and set the most critical aerodynamic and safety-related functions of an EASYLAB fume cupboard controller. The control panel includes an OLED display, function buttons, a three-colour status display, an alarm sounder and a service socket.
Casing suitable for flush mounting or surface mounting to the fume cupboard side frame.
Functions
Configurable functions
Function buttons that can be activated
Special characteristics
Materials and surfaces
Technical data
Installation and commissioning
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051