VSD50

VSD50-1-AK

Installation in continuous ceilings

Concealed screw fixing

Alternating horizontal air discharge

Plenum box with damper blade (optional)

VSD50

With wide diffuser face for larger volume flow rates

Slot diffusers with 50 mm diffuser face (nominal width) and adjustable air control elements

Nominal length from 600 to 1950 mm, 1 or 2 slots
Volume flow rate range 20 – 120 (l/s)/m or 72 – 432 (m³/h)/m
Diffuser face made of extruded aluminium sections
For variable and constant volume flows
Suitable for continuous linear arrangement
High induction results in a rapid reduction of the temperature difference and airflow velocity
Individually adjustable air control elements to meet individual local requirements

Optional equipment and accessories

Exposed diffuser face available in RAL CLASSIC colours
Diffuser face with extended border
Damper blade for volume flow rate balancing, can be adjusted through the diffuser face
Concealed screw fixing that simplifies installation of the diffuser after the ceiling has been completed
Symmetric and asymmetric plenum boxes, with or without lining
End plates, end angles, corner sections

Application

Application

Type VSD50 slot diffusers are used as supply air or extract air devices in comfort zones
Air discharge is one-way or alternating horizontal, or alternating angled; turbulent flow (mixed flow ventilation)
High induction results in a rapid reduction of the temperature difference and airflow velocity (supply air variant)
For variable and constant volume flows
For supply air to room air temperature differences from –10 to +10 K
For room heights up to 4 m (lower edge of suspended ceiling)
For suspended ceilings; suitable for restricted ceiling voids due to the low overall height of the plenum box
Suitable for continuous linear arrangement

Special characteristics

Individually adjustable air control elements to meet individual local requirements
High induction results in a rapid reduction of the temperature difference and airflow velocity
Diffuser face has been optimised for maximum volume flow rate at low sound power levels
Suitable for continuous linear arrangement

Nominal sizes

L_N: 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800, 1950 mm
Diffuser face available in intermediate sizes from 300 to 2550 mm, in increments of 1 mm

Description

Variants

VSD50-*: 1 or 2 slots
VSD50-*-F: Diffuser face only
VSD50-*-E: Corner section
VSD50-...: Diffuser face without extended border
VSD50-.../B00: Diffuser face with extended border
VSD50-...: Black air control elements
VSD50-.../WW: White air control elements

Plenum box and diffuser face fixing

AK: Plenum box and clamp fixing
DK: Plenum box with lining and clamp fixing
AS: Plenum box and concealed screw fixing
DS: Plenum box with lining and concealed screw fixing
AA: Asymmetric plenum box and clamp fixing

Parts and characteristics

Diffuser face with individually adjustable air control elements
Plenum box for horizontal duct connection
Concealed screw fixing (facilitates installation of the diffuser face) or clamp fixing
Connecting pins and alignment plates to connect and align slot diffusers for a continuous linear arrangement

Attachments

M: Damper blade for volume flow rate balancing
C1, C2: Two end plates
C5, C6: Two end angles

Accessories

Lip seal

Useful additions

EP: Two end plates
EW: Two end angles
To be ordered separately for continuous linear runs

Construction features

Spigot suitable for circular ducts to EN 1506 or EN 13180
Spigot with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

Diffuser face made from extruded aluminium sections
Air control elements made of plastic, UL 94, V-0, flame retardant
Plenum box made of galvanised sheet steel
End plate and end angle made of aluminium
Lip seal made of rubber
Lining is mineral wool
Diffuser face with anodised finish, E6-C-0, natural colour
P1: Powder-coated, RAL CLASSIC colour
Air control elements similar to RAL 9005, black
WW: Air control elements similar to RAL 9010, white

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

Standards and guidelines

Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

Maintenance-free as construction and materials are not subject to wear
Inspection and cleaning to VDI 6022

Technical information

Schematic illustration of the VSD50 with clamp fixing 00129727_0

① Diffuser face
② Adjustable air control element
③ Neck
④ Plenum box
⑤ Suspension lug
⑥ Spigot
Optional
⑦ Lip seal
⑧ Damper blade for volume flow rate balancing
⑨ Clamp fixing

Functional description

Slot diffusers direct the air from air conditioning systems into the room, either horizontally or at an angle. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.

Type VSD50 slot diffusers have adjustable air control elements. The air pattern can be adjusted to meet different local requirements. Air discharge is one-way or alternating horizontal. Heating mode with angled air discharge is also possible. The supply air to room air temperature difference may range from –10 to +10 K.

A damper blade (optional) simplifies volume flow rate balancing for commissioning.

To give rooms an aesthetic, uniform look, Type VSD50 diffusers may also be used for extract air.

Nominal length	600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800, 1950 mm
Number of slots	1, 2
Neck extension	0, 25, 50, 75, 100, 125 mm
Minimum volume flow rate	20 – 40 (l/s)/m or 72 – 144 (m³/h)/m
Maximum volume flow rate, with L_WA ≅ 50 dB(A)	70 – 120 (l/s)/m or 252 – 432 (m³/h)/m
Supply air to room air temperature difference	–10 to +10 K

Quick sizing – sound power level and total differential pressure

Nominal length	V		Damper blade position
Nominal length	V		0°				45°				90°
Nominal length	V		D = 123		D = 158		D = 123		D = 158		D = 123		D = 158
Nominal length	V		Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA
Nominal length	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
600	11	38	4	<15	3	<15	5	<15	4	<15	7	<15	4	<15
600	25	90	19	31	17	28	25	32	20	28	36	32	24	28
600	40	144	49	45	44	42	65	46	50	42	91	46	60	42
600	50	180	77	52	69	49	101	53	78	49	143	54	93	50
750	15	54	5	<15	4	<15	7	15	5	<15	11	15	7	12
750	30	108	20	33	17	29	28	33	20	29	43	34	25	29
750	40	144	35	41	30	37	50	42	35	37	77	42	45	38
750	55	198	65	51	56	47	94	52	66	48	145	53	85	48
900	15	54	4	<15	3	<15	6	<15	4	<15	10	<15	5	<15
900	35	126	20	34	17	30	32	34	21	30	53	35	28	31
900	50	180	41	44	33	41	65	45	42	41	107	46	58	41
900	65	234	70	53	56	49	110	54	71	49	181	55	97	50
1050	20	72	6	17	4	<15	9	17	6	<15	16	18	8	<15
1050	40	144	22	35	17	31	37	36	22	32	64	37	32	32
1050	55	198	41	45	31	41	70	45	42	41	120	46	60	42
1050	70	252	66	52	50	48	113	53	68	49	195	55	98	50
1200	25	90	7	20	5	17	13	21	8	17	24	21	11	17
1200	40	144	19	33	13	29	34	34	19	29	61	34	29	30
1200	55	198	35	42	25	38	64	43	36	39	114	44	54	39
1200	75	270	64	52	47	48	118	53	67	48	212	54	101	49
1350	25	90	7	19	5	15	13	19	7	15	23	20	11	15
1350	45	162	21	34	14	30	40	35	21	31	74	36	34	31
1350	65	234	43	45	29	41	83	46	44	42	154	47	70	42
1350	80	288	65	52	44	48	126	53	67	48	233	54	106	49
1500	30	108	8	22	6	18	17	22	9	18	32	23	14	19
1500	50	180	23	36	15	31	47	37	24	32	89	37	39	33
1500	70	252	45	46	29	41	92	47	47	42	174	48	77	43
1500	85	306	66	52	43	47	135	53	69	48	256	55	113	49
1650	30	108	5	18	4	<15	7	18	5	<15	11	19	6	<15
1650	50	180	13	31	11	28	20	32	13	28	31	33	18	28
1650	75	270	29	43	24	40	44	44	30	40	70	45	39	40
1650	100	360	51	52	43	49	78	53	52	49	124	54	69	50
1800	35	126	6	20	5	17	9	21	6	17	15	21	8	17
1800	58	210	16	34	13	30	25	35	16	31	40	36	22	31
1800	82	294	30	44	25	40	48	45	31	41	79	46	42	41
1800	105	378	50	52	41	48	79	53	51	49	130	54	70	50
1950	35	126	5	19	4	16	8	20	5	16	14	20	7	16
1950	60	216	15	34	12	30	24	34	15	30	41	35	21	31
1950	85	306	30	44	23	40	49	45	30	41	82	46	42	41
1950	110	396	49	52	39	48	81	53	51	49	137	55	71	50

Quick sizing – sound power level and total differential pressure

Nominal length	V		Damper blade position
Nominal length	V		0°				45°				90°
Nominal length	V		D = 158		D = 198		D = 158		D = 198		D = 158		D = 198
Nominal length	V		Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA	Δp_t	L_WA
Nominal length	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
600	25	90	5	17	5	<15	8	17	6	<15	11	17	7	<15
600	45	162	17	32	15	29	24	33	18	29	37	33	23	29
600	65	234	35	43	31	40	50	44	37	40	76	45	47	41
600	85	306	60	52	52	49	85	53	62	49	130	54	80	50
750	30	108	6	18	5	<15	9	18	6	<15	14	19	8	15
750	50	180	15	31	12	28	24	32	16	28	39	33	22	29
750	80	288	38	45	31	42	61	46	41	42	100	47	56	43
750	100	360	60	53	49	49	95	54	63	50	156	55	88	51
900	35	126	6	19	5	16	10	19	6	16	18	20	9	16
900	60	216	17	34	13	30	30	34	18	30	52	35	27	31
900	85	306	34	44	26	40	60	45	37	41	104	46	55	42
900	110	396	57	52	44	49	100	53	61	49	174	55	91	50
1050	40	144	7	20	5	17	12	21	7	17	22	21	11	17
1050	65	234	17	33	12	30	32	34	18	30	58	35	29	31
1050	90	324	32	43	23	39	61	44	35	40	110	45	55	41
1050	120	432	57	52	41	48	108	53	62	49	196	55	98	50
1200	45	162	7	21	5	18	14	22	8	18	27	23	13	18
1200	70	252	17	33	12	30	34	34	19	30	64	35	31	31
1200	100	360	35	44	24	40	70	45	38	41	131	46	63	42
1200	130	468	58	52	40	48	118	54	64	49	222	55	106	50
1350	50	180	8	22	5	19	17	23	9	19	32	24	15	19
1350	80	288	20	35	13	31	43	36	22	32	82	37	38	33
1350	110	396	38	45	25	41	80	46	42	42	155	47	72	43
1350	140	504	61	52	40	48	130	54	68	50	250	56	116	51
1500	55	198	9	23	6	19	20	24	10	20	38	25	17	20
1500	90	324	23	37	15	33	52	38	26	34	102	39	46	35
1500	125	450	45	47	28	43	100	48	50	44	196	50	89	45
1500	150	540	65	53	40	49	144	54	72	50	282	56	128	51
1650	60	216	5	21	4	18	9	22	6	18	15	22	8	18
1650	95	342	13	34	11	31	22	35	14	31	37	36	20	31
1650	135	486	26	45	21	41	44	46	28	42	75	47	41	42
1650	175	630	44	53	35	49	74	54	47	50	126	56	68	51
1800	65	234	6	22	4	19	10	23	6	19	17	23	9	19
1800	105	378	14	36	11	32	25	36	16	32	44	37	23	33
1800	145	522	27	45	21	42	48	46	29	42	83	47	44	43
1800	185	666	44	53	34	50	78	54	48	50	135	56	71	51
1950	70	252	6	23	5	19	11	24	6	20	19	24	10	20
1950	110	396	14	36	11	32	26	36	16	32	47	37	24	33
1950	150	540	27	45	20	41	48	46	29	42	86	47	44	43
1950	190	684	43	52	32	49	78	54	46	50	138	55	71	51

Slot diffusers with individually manually adjustable air control elements and an aesthetically shaped face section with one or two slots, for horizontal one-way, horizontal alternating or angled alternating air discharge. For supply air or extract air. For installation into suspended ceilings.

Ready-to-install component which consists of the diffuser face with individually adjustable black or white air control elements, and of a plenum box with side entry spigot and suspension lugs.

Clamp fixing or concealed screw fixing

Spigot suitable for circular ducts to EN 1506 or EN 13180.

Sound power level of the air-regenerated noise measured according to EN ISO 5135.

Special characteristics

Individually adjustable air control elements to meet individual local requirements
High induction results in a rapid reduction of the temperature difference and airflow velocity
Diffuser face has been optimised for maximum volume flow rate at low sound power levels
Suitable for continuous linear arrangement

Materials and surfaces

Diffuser face made from extruded aluminium sections
Air control elements made of plastic, UL 94, V-0, flame retardant
Plenum box made of galvanised sheet steel
End plate and end angle made of aluminium
Lip seal made of rubber
Lining is mineral wool
Diffuser face with anodised finish, E6-C-0, natural colour
P1: Powder-coated, RAL CLASSIC colour
Air control elements similar to RAL 9005, black
WW: Air control elements similar to RAL 9010, white

Mineral wool

To EN 13501, fire rating class A1, non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EG
Faced with glass fibre fabric as a protection against erosion through airflow velocities of up to 20 m/s
Inert to fungal and bacterial growth

Technical data

Nominal length: 600 – 1950 mm
Number of slots: 1, 2
Neck extension: 0, 25, 50, 75, 100, 125 mm
Minimum volume flow rate: 20 – 40 (l/s)/m or 72 – 144 (m³/h)/m
Maximum volume flow rate with L_WA ≅ 50 dB(A): 70 – 120 (l/s)/m or 252 – 432 (m³/h)/m
Supply air to room air temperature difference: –10 to +10 K

Type
VSD50 Slot diffuser

Number of slots
1
2

Connection
F       Diffuser face only
E       90° corner section only
       Plenum box
AK       With clamp fixing
DK       With lining and clamp fixing
AS       With concealed screw fixing
DS       With lining and concealed screw fixing
AA       Asymmetric and with clamp fixing
       Diffusers with a shorter plenum box as well as non-active diffusers require a rear blanking plate
       Length of blanking plate = L₁ – L₃

Damper blade for volume flow rate balancing
No entry: none
M With

Accessories
No entry: none
L With lip seal

Nominal size [mm]
Nominal length L_N
600
750
900
1050
1200
1350
1500
1650
1800
1950

       Specify ØD and Y only for AK, DK, AS, DS and AA
       Up to L_N 1500 with one spigot, from L_N 1650 with two spigots
       spigot diameter ØD
123       1 slot
158       1 or 2 slots
198       2 slots

Neck extension Y
No entry: 0
25
50
75
100
125
(125 only AK, DK and AA)

End pieces
       No entry: without
       Both ends with end angles factory fitted
C1       to profile 000
C2       to profile B00
       Both ends with end plates factory fitted
C5       to profile 000
C6       to profile B00
       To be ordered separately for slot diffusers for linear arrangement

Extended border
No entry: without (only AK, DK, AA)
B00 With extended border

Exposed surface
No entry: anodised, E6-C-0, natural colour
P1 Powder-coated, specify RAL CLASSIC colour

       Gloss level
       RAL 9010 50 %
       RAL 9006 30 %
       All other RAL colours 70 %

Air pattern
       No entry: alternating horizontal (WH)
WS       Alternating angled
HL       Horizontal left (opposite direction from spigot)
HR       Horizontal right (same direction as spigot)

Colour of air control elements
No entry: similar to RAL 9005, black
WW Similar to RAL 9010, white

Downloads

product information

Slot Diffuser Type VSD50 - Technical Data Sheet

2/2.7/B/1 (02/2023) 1 MB pdf

certificates

Non-CE Manufacturer statement - Type VSD

VSD--AKV-VSD_Not_CE_2023_08_10_DE_en | Type VSD 650 KB pdf

operation manuals

VSD35-V3 AND VSD50- V3 SPRING CLIP INSTALLATION INSTRUCTIONS

2,5 MB pdf

TROX Services

Product search A-Z Find out quickly and simply.

TROX Easy Product Finder Fast. Reliable. Innovative.

By clicking the button, you allow us to provide you with an optimised website experience and easy shopping process. Cookies included are those necessary for the operation of the site and for the control of our services and applications, as well as those that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow by adjusting the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. Additionally, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistical analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely and how people navigate between web pages. All information used by third parties is aggregated and anonymised.

VSD50

With wide diffuser face for larger volume flow rates

Application

Description

Technical information

Downloads

product information

Slot Diffuser Type VSD50 - Technical Data Sheet

certificates

Non-CE Manufacturer statement - Type VSD

operation manuals

VSD35-V3 AND VSD50- V3 SPRING CLIP INSTALLATION INSTRUCTIONS

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE