Application
Classification
Meets the hygiene requirements
Nominal sizes
Filter classes
Filter group
Filter class
Construction
Useful additions
Construction features
Materials and surfaces
Standards and guidelines
gravimetric separation efficiency Coarse [%] according to ISO 16890 | 60 | 80 |
---|---|---|
Initial differential pressure [Pa] at nominal volume flow rate for T = 360 mm | 35 | - |
Initial differential pressure [Pa] at nominal volume flow rate for T = 600 mm | 30 | 40 |
Final differential pressure [Pa] | 200 | 200 |
Max. operating temperature [°C] for frames made of plastic | 60 | 60 |
Max. operating temperature [°C] for frames made of galvanised sheet steel | 90 | 90 |
,
Changing the filter/Final differential pressure
The aim is to find the optimum of the longest possible service life with energetically low differential pressure and safe hygiene. A fixed, recommended value for the final differential pressure can tempt people to insist on keeping to this value, irrespective of its usefulness and today's standards with regard to, for example, energy saving, sustainability or resource conservation. To save costs and energy, we generally recommend the use of technically high-quality filters with low initial differential pressure and a flat differential pressure curve. In addition, the preferred criterion for a filter change should be the differential pressure. For further information, please refer to the installation and maintenance instructions.
Specification text
Pocket filters PFC made of non-woven chemical fibres for the separation of coarse dust when used as a prefilter, and for the separation of fine dust when used as a prefilter or final filter in ventilation systems. Filter pockets provide a high dust holding capacity at a low initial differential pressure. Pocket filters made of non-woven chemical fibres are available in standard and special sizes; variable number of pockets and pocket depth; filter group ISO Coarse according to ISO 16890. Pocket filters PFC are compliant with VDI 6022 in terms of hygiene.
Materials and surfaces
Construction
Sizing data
PFC | – | Coarse | – | 60 % | – | PLA | – | 25 | / | 592 × 592 × 360 | × | 6 |
| | | | | | | | | | | | | | ||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Order example: PFC-Coarse-60%-PLA-25/592×592×360×6
Type | PFC |
Classification | Gravimetric efficiency according to ISO 16890 |
Efficiency | 60% |
Construction | Plastic frame |
Frame depth [mm] | 25 |
Nominal size [mm] | Width 592, height 592, depth 360 |
Number of pockets | 6 |
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051