img_pro_001380.png

Tested to VDI 6022

Eurovent_Filter_Marketing_Highlightai.ai.link

Eurovent certification

ATEX construction optional

img_pro_001380.png
Eurovent_Filter_Marketing_Highlightai.ai.link

PFN

PREFILTERS OR FINAL FILTERS IN VENTILATION AND AIR CONDITIONING SYSTEMS


Pocket filters for the separation of fine dust

  • Filter groups ePM10 and ePM1 (fine dust filters)

  • Performance tested to ISO 16890

  • Eurovent certification for fine dust filters

  • Meets the hygiene requirements of VDI 6022

  • High energy efficiency class according to Eurovent

  • NanoWave® medium, sewn

  • Enlarged filter area due to filter pockets

  • NanoWave® medium with extremely low initial differential pressure and highest possible dust holding capacity, ideal flow conditions due to wedge-shaped filter pockets

  • Different numbers of pockets and pocket depths

  • Quick installation and filter changing times due to easy, safe handling

  • Fitting into standard cell frames for filter walls (type SIF) or into universal casings (type UCA) for duct installation

 

Optional equipment and accessories

  • Front frame made of plastic or galvanised sheet steel

 

ATEX construction for protection zones 1 and 2 as well as 21 and 22

 

 

 


General information

Application

  • Pocket filter made of NanoWave® medium type PFN for the separation of fine dust

  • Fine dust filter: Prefilter or final filter in ventilation systems




Classification 

  • Eurovent certification for fine dust filters

  • Hygiene conformity

  • Certificate of conformity for use in areas with a potentially explosive atmosphere



Nominal sizes

  • B × H × D [mm]




Filter classes

Filter groups

  • ISO ePM10 to ISO 16890

  • ISO ePM1 to ISO 16890


Filter classes

  • ePM10 60 %

  • ePM1 65 %

  • ePM1 90 %



Construction

  • PLA: Frame made of plastic

  • GAL: Frame made of galvanised steel

  • EX: Protection zones 1 and 2, as well as 21 and 22 (only in combination with GAL)




Useful additions

  • Filter wall (SIF)

  • Universal casing (UCA)




Construction features

  • Wedge-shaped filter pockets

  • Multi-layer filter medium with a prefilter layer and a layer of corrugated extra fine fibres

  • Frame depth of construction PLA: 25 mm

  • Frame depth of construction GAL: 20, 25 mm

  • Number of pockets: 3, 4, 5, 6, 7, 8, 10




Materials and surfaces

  • Filter media made of synthetic fibres in corrugated structure

  • Frame made of plastic or galvanised sheet steel



Standards and guidelines

  • Test according to ISO 16890; international standard for general room air distribution; classification of arrestance efficiency based on the measured fractional arrestance efficiency, which is processed into a reporting system for the fine dust arrestance efficiency (ePM)

  • For fine dust filters, the fractional arrestance efficiency of a certain size range is determined by aerosols (DEHS and KCl)

  • The filters are classified into filter groups ISO ePM10 and ISO ePM1 depending on the tested values

  • Hygiene conformity for construction PLA: VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 16798

  • Certificate of conformity for correct use in areas with a potentially explosive atmosphere in accordance with Directive 2014/34/EU and compliance with basic health and safety requirements in accordance with EN 80079-36:2016 and EN 80079-37:2016


Technical information

Technical data, Specification text, Order code

  • Technical data
  • SPECIFICATION TEXT
  • ORDER CODE

Fractional efficiency ePM10 [%] to ISO 1689060
Fractional efficiency ePM1 [%] to ISO 168906590
Initial differential pressure [Pa] at nominal volume flow rate6080130
Maximum operating temperature [°C] for frames made of plastic606060
Maximum operating temperature [°C] for frames made of galvanised sheet steel909090

Specification text

Pocket filter PFN made of NanoWave® medium as prefilters or final filters for the separation of fine dust in ventilation and air conditioning systems. Wedge-shaped filter pockets ensure ideal airflow conditions. Highest possible dust holding capacity with an extremely low initial differential pressure due to a multi-layer filter medium with a prefilter layer and a layer of corrugated extra fine fibres. Pocket filters made of NanoWave® medium are available in standard sizes with variable numbers of pockets and pocket depth, filter groups ePM10 and ePM1 according to ISO 16890. Pocket filters made of NanoWave® medium are Eurovent-certified and compliant with VDI 6022 in terms of hygiene. The PFN-EX pocket filters with optional EX protection may be used in areas with a potentially explosive atmosphere of zones 1 and 2, as well as zones 21 and 22 (EX II 2G Ex h IIC Gb and EX II 2D Ex h IIIB Db). It is mandatory to connect the filters to the earth potential. All conductive and dissipative parts must be connected together and grounded. Conductive dusts are excluded from the application. Under no circumstances should metallic foreign materials enter the filter. 
Ambient temperature range: -40 °C ≥ Ta ≥ +80 °C

Materials and surfaces

  • Filter media made of synthetic fibres in corrugated structure

  • Frame made of plastic or galvanised sheet steel



Construction

  • PLA: Frame made of plastic

  • GAL: Frame made of galvanised steel

  • EX: Protection zones 1 and 2, as well as 21 and 22 (only in combination with GAL)

Sizing data

  • Filter group [ISO 16890]

  • Efficiency [%]

  • Volume flow rate [m³/h]

  • Initial differential pressure [Pa]

  • Nominal size [mm]




PFNePM190%PLA25/592 × 592 × 600×10
|||||||
1234567
1 Type
PFN Pocket filters made of NanoWave® medium
 
2 Classification
ePM10 Fractional efficiency ePM10 to ISO 16890
ePM1 Fractional efficiency ePM1 to ISO 16890
 
3 Efficiency [%]
In accordance with ISO 16890
 
4 Construction
PLA Frame made of plastic
GAL Frame made of galvanised steel
Ex Protection zones 1 and 2 as well as 21 and 22 (only in combination with GAL)
 
5 Frame depth [mm]
20 (Only with GAL)
25
 
6 Nominal size [mm]
B × H × T
 
7 Number of pockets
3, 4, 5, 6, 7, 8, 10
   

Dimensions

  • DIMENSIONS
Dimensional drawing of PFN-…
Product-specific data

Nominal size

Number of pockets

Filter class

Nominal volume flow rate

Initial differential pressure

Filter area [m²]

Weight [kg]

B

H

T

qv [l/s]

qv (m³/h)

ΔpA [Pa]

5925926006ePM10 60 %9443400604.41.5
4905926005ePM10 60 %7782800603.71.3
2875926003ePM10 60 %4721700602.20.9
5924906006ePM10 60 %7782800603.61.4
5922876006ePM10 60 %4721700602.10.9
2872876003ePM10 60 %236850601.10.5
5928926006ePM10 60 %14175100606.62
4908926005ePM10 60 %11674200605.51.6
2878926003ePM10 60 %7082550603.31.1
5925926008ePM1 65 %9443400805.92
4905926007ePM1 65 %7782800805.11.7
2875926004ePM1 65 %4721700802.91.1
5924906008ePM1 65 %7782800804.91.7
5922876008ePM1 65 %4721700802.81.1
2872876004ePM1 65 %236850801.40.6
5928926008ePM1 65 %14175100808.82.4
4908926007ePM1 65 %11674200807.72.2
2878926004ePM1 65 %7082550804.41.4
59259260010ePM1 90 %94434001307.32.2
4905926008ePM1 90 %77828001305.91.8
2875926005ePM1 90 %47217001303.71.2
59249060010ePM1 90 %77828001306.11.9
59228760010ePM1 90 %47217001303.61.3
2872876005ePM1 90 %2368501301.80.7
59289260010ePM1 90 %1417510013011.12.6
4908926008ePM1 90 %116742001308.82.3
2878926005ePM1 90 %70825501305.51.5
① Nominal size ② Nominal volume flow rate ③ Initial differential pressure ④ Filter area ⑤ Weight

Downloads

product information

certificates

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://*.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://*.onventis.com http://localhost:63342 http://cerebrum.local", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051