Air-water systems for the dissipation of high heat loads

Lab equipment generates high volumes of waste air. If all heat loads were to be dissipated only by the supply air, an increased volume flow rate would be required. And higher volume flow rates also mean a higher energy consumption, a more difficult supply air discharge, and also higher costs. Air-water systems are a sensible addition here.

In many countries, air-water systems such as TROX DID active chilled beams ensure the energy-efficient dissipation of high heat loads generated by lab equipment.

With an all-air system, large volume flow rates are required, which in turn incur high energy costs for air treatment and air transport. Air-water systems move energy with water, which is more efficient than air, such that less energy is required for the same cooling capacity.
maßgeschneiderte_luftfuerung

Active chilled beam DID632
Primary air:
6 – 85 l/s
22 – 306 m³/h
L: 900 – 3,000 mm
B: 593, 598, 618 und 623 mm
H: 210 mm
Cooling capacity: up to 2,500 W
Heating capacity: up to 3,000 W

To the Productpage

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051