Application
Control panel for fume cupboard control
Room control panel
Special characteristics
Parts and characteristics
Useful additions
Construction features
Materials and surfaces
The BE-LCD control panel is used to display and control the most critical aerodynamic and safety-related functions of a fume cupboard or a room. Users obtain information regarding the condition of the fume cupboard or room and can select among various operating modes. The individual display elements and controls are as follows:
The range of functions of the control panel can be adapted to project-specific requirements using the EasyConnect configuration software. The range of functions may vary for different fume cupboards or rooms.
The function button fields are used for display and for operation. The available functions are highlighted in blue.
A required function can be selected by pressing the corresponding button.
The 40-character display shows system messages or, if enabled, actual values.
Supply voltage | 24 V DC from the controller TCU3 or adapter module TAM |
Connecting cable | Approx. 5 m standard network patch cable, SF-UTP, extendable to 40 m |
Operating temperature | 10 – 50 °C |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 20 |
EC conformity | EMC according to 2004/108/EC |
Dimensions | 145 × 111 × 23 mm |
Weight | 0.280 kg |
Control panels with adjustable status display for the EASYLAB system, used to display and control the most critical aerodynamic and safety-related functions of a fume cupboard or a room. The control panel includes a backlit 40-character display, function buttons, a three-colour status display, an alarm sounder, and a service socket.
Mounting on side frame or wall
Functions
Configurable functions
Control panel for fume cupboard controller
Function buttons that can be activated
Text display
Control panel for room controllers
Functions
Function buttons that can be activated
The operating mode default setting applies to all controllers in a room.
Text display
Special characteristics
Materials and surfaces
Technical data
Application
Functions
Text displays
Configurable functions
Operating modes
The fume cupboard controller monitors the required volume flow rate and, depending on configuration, the face velocity. A relevant deviation is indicated on the three-colour status display, together with the text LOW or HIGH. If the volume flow rate is too low, an acoustic alarm is sounded.
Status display
The red signal can be configured either as a permanent light or blinking, as recommended by EN 14175
40-character display
Controls
Application
Functions
Monitoring
Text displays
Configurable functions
Depending on the control strategy and configuration, the control panel monitors and signals for example the total volume flow rates or pressure conditions for a room that is equipped with up to 24 EASYLAB controllers. Relevant deviations are indicated on the three-colour status display. As an option, acoustic alarms can be configured. Controller faults are signalled to the room control panel as an configurable consolidated alarm. The necessary data is exchanged between the controllers via the EASYLAB communication cable.
Installation and commissioning
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051