Enclosure X-AIR-PCASE230V (closed lid)
Enclosure Factory settings
Enclosure with extension provided by others Zone module
Enclosure with extension provided by others Zone master
Enclosure with extension provided by others Zone module and splitter

X-AIR-PCASE230V

X-AIR-PCASE230V enclosure for max. one zone module or one zone master.

X-AIRCONTROL enclosure for mounting (to be performed by others) of a zone module or a zone master within a zone (room)
  • Provision of the supply voltage 24 V AC for the zone module or zone master through an integrated transformer
  • Feed of 230 V AC to 4-wire double terminals
  • Additional mounting of an optional four-way splitter (X-SENS-SPLITTER) possible
  • Pre-wired

Application

Application

  • Type X-AIR-PCASE230V enclosure for mounting a zone module or zone master
  • Provision of supply voltage for a zone module or a zone master and the components connected to it, e.g. volume flow controllers, valve drives or sensors
  • For mounting the four-way splitter X-SENSSPLITTER
  • Wall installation
  • Ceiling installation (optional)

Special features

  • Simple wall installation thanks to removable mounting bracket
  • Simple installation of the zone module or zone master and the four-way splitter X-SENSSPLITTER thanks to pre-installed DIN mounting rails
  • 230 V/24 V AC transformer including micro fuse, installed and wired
  • Connection and transmission of the supply voltage via 4-wire double terminals
  • Enclosure is supplied without a zone module or zone master

DESCRIPTION

Parts and characteristics

  • For supply voltage 230 V AC, 50 Hz
  • 4-wire double terminals for feed and transmission (L1/N/PE)
  • Transformer with micro fuse 230 V AC to 24 V AC
  • Pre-assembled mounting rail
  • 2-pole connection plug for supply voltage of zone module or a zone master
  • Wire clamping bracket integrated into the casing
  • Bracket for wall assembly

Useful additions

  • Zone modules X-AIR-ZMO-MP, X-AIR-ZMOMOD or X-AIR-ZMO-ANA
  • Zone master X-AIR-ZMAS
  • Four-way splitter X-SENS-SPLITTER
  • X-AIR-PCASE-C optional mounting bracket for ceiling mounting for type X-AIR-PCASE230V 

Materials and surfaces

  • Casing in plastic (ABS), UL 94 V-0
  • Basic colour grey, RAL 7037

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning; regular cleaning is recommended (removal of dust)

Technical information

Function, Technical data, Specification text, Order code

  • FUNCTION
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
① Cable gland
② Wall bracket (supply package)
③ Slot for zone module or zone master
④ Connection plug for zone module or zone master (24 V AC)
⑤ Connection for supply voltage 230 V AC
⑥ Transformer 230 V / 24 V AC
⑦ Slot for four-way splitter X-SENS-SPLITTER

Functional description 
The X-AIR-PCASE230V enclosure is provided for mounting of a zone module or zone master. To mount the zone module / zone master and the four-way splitter X-SENS-SPLITTER and the integrated components, the X-AIR-PCASE230V enclosure comes with two mounting rails. The enclosure is a plastic ABS casing that holds a zone module or a zone master. Via a transformer integrated into the X-AIR-PCASE230V, a zone module or a zone master is supplied with 24 V AC with the aid of a 2-pole connection plug. As standard, the X-AIR-PCASE230V comes with a mounting bracket for wall installation. The mounting bracket has 4 holes (Ø5 mm) so that it can be fixed to the wall. For optimum ceiling assembly, the X-AIR-PCASE-C mounting bracket is provided as an accessory. The X-AIR-PCASE230V is supplied without a zone module, zone master or X-SENS-SPLITTER. These have to be installed on site depending on the use. To connect the supply voltage, 3 × 4-wire feed-through terminal blocks (L1/N/PE) are provided A 230 V/24 V AC transformer including micro fuse for the supply voltage to the components is installed and wired. Cables can be fed through the rubber membranes at the side. The lid of the X-AIR-PCASE230V is fitted with a security device that prevents it from being opened by unauthorised persons.

The X-AIR-PCASE230V enclosure is provided for mounting of a zone module or zone master. The enclosure is made of ABS plastic and can hold one zone master or one zone module. As standard, the X-AIR-PCASE230V comes with a mounting bracket for wall installation. The mounting bracket has 4 holes (Ø5 mm) so that it can be fixed to the wall. For optimum ceiling assembly, the X-AIR-PCASE-C mounting bracket is provided as an accessory. The X-AIR-PCASE230V is intended for use with a zone master or zone module and fitted with two mounting rails for installation. The X-AIR-PCASE230V is delivered without a zone module, zone master or splitter. These have to be installed on site, by others. 3 x 4-wire feedthrough terminal blocks L1/N/PE are provided for the connection of the supply voltage. A 230 V/24 V AC transformer including micro fuse for the supply voltage to the components is installed and wired. Cables can be fed through the rubber membranes at the side. The lid of X-AIR-PCASE230V is fitted with a security device that prevents it from being opened by unauthorised persons. A Phillips screwdriver is required to open the security device.

Special features

  • Simple wall installation thanks to removable mounting bracket
  • Simple installation of the zone module or zone master and the four-way splitter X-SENSSPLITTER thanks to pre-installed DIN mounting rails
  • 230 V/24 V AC transformer including micro fuse, installed and wired
  • Connection and transmission of the supply voltage via 4-wire double terminals
  • Enclosure is supplied without a zone module or zone master

Materials and surfaces

  • Casing in plastic (ABS), UL 94 V-0
  • Basic colour grey, RAL 7037

Technical data

  • Supply voltage 230 V AC ±10 %, 50 Hz
  • Power consumption (transformer): 35 VA maximum
  • Micro fuse transformer: T250 mA (Ø5 × 20 mm, EN 60127-2/III)
  • Connection (spring-loaded terminals, max. 2.5mm²: 4-wire double terminals
  • Temperature (operation): –10 to 40 °C
  • Temperature (storage): –20 to 50 °C
  • Degree of protection : IP20 (EN 60529)
  • Protection class: I (protective conductor)
  • Dimensions with wall mounting bracket (W × D× H): approx. 282 × 267 × 155 mm (lid closed), approx. 282 × 300 × 380 mm (lid open)
  • Dimensions with ceiling bracket (W × D × H): approx. 282 × 330 × 150 mm (lid closed), approx. 282 × 330 × 380 mm (lid open)
  • Casing: plastic (ABS), UL 94 V-0, basic colour grey, RAL 7037
  • Weight: approx. 2700 g
 Type
X-AIR-PCASE230V
 Useful additions
X-AIR-ZMO-MP MP-Bus zone module
X-AIR-ZMO-MOD Modbus RTU zone module
X-AIR-ZMO-ANA Analogue zone module
X-SENS-SPLITTER Four-way splitter
X-AIR-PCASE-C Ceiling mounting bracket

Dimensions and weight

  • Dimensions and weight

Installation details

  • Installation details
Installation and commissioning
  • Attach the wall/ceiling bracket and X-AIR-PCASE230V and lock it into place
  • Mount the zone module or zone master on the mounting rail and if necessary attach the fourway splitter X-SENS-SPLITTER
  • Perform the wiring for zone master/zone module and, if necessary, the four-way splitter
  • Provide 24 V AC supply voltage for the zone module/zone master with the aid of 2-pole plug connectors (pay attention to the plug position for the zone modules)
  • Lay the wiring for the 230 V AC supply voltage
  • Close the lid with the security latch
  • Check the functioning of all the connected components

Downloads

product information

  • Print page X-AIR-PCASE230V

  • Product data sheet Type X-AIR PCASE230V

    Product data sheet  720 KB pdf

certificates

  • EU Konformitätserklärung / EU Declaration of conformity X-AIR-PCASE230V

    CE_2018_04_X-AIR-PCASE_de_en_fr EU Konformitätserklärung / EU Declaration of conformity 46 KB pdf

operation manuals

  • Montageanleitung / Installation Manual X-AIR-PCASE230V

    IM 2018-03 A00000064766 Montageanleitung / Installation Manual 510 KB pdf

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

TROX Logo
By clicking the button, you allow us to provide you with an optimised website experience and easy shopping process. Cookies included are those necessary for the operation of the site and for the control of our services and applications, as well as those that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow by adjusting the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Change Settings