Conforme à VDI 6022
Application
Special characteristics
Variants
Construction
Attachments
Useful additions
Construction features
Materials and surfaces
Functional description
Active chilled beams provide centrally conditioned primary air (fresh air) to the room and use heat exchangers for additional cooling and/or heating.
The primary air is discharged through nozzles into the mixing chambers; as a result of this, secondary air (room air) is induced via the induced air grille and passes through the heat exchanger.
Primary and secondary air mix and are then supplied to the room horizontally through the supply air slots.
Active chilled beams of Type DID312, with two-way air discharge and high thermal output, providing high thermal comfort levels.
For installation flush with the ceiling, preferably in rooms with a height up to 4.20 m.
The units consist of a casing with suspension points, a spigot, non-combustible nozzles, and two vertical heat exchangers.
Nozzles in three sizes to optimise induction based on demand.
Special characteristics
Materials and surfaces
Construction
Technical data
Type DID 312
Active chilled beam with two-way air discharge, 300 mm nominal width, vertical heat exchanger and condensate drip tray
Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.
Optional equipment and accessories
For further product information please click here
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
We are here for you
Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051