Type DID632

ACTIVE CHILLED BEAM WITH TWO-WAY AIR DISCHARGE AND HORIZONTAL HEAT EXCHANGER, SUITABLE FOR GRID CEILINGS WITH GRID SIZE 600

 Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.0 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Four nozzle variants to optimise induction based on demand
Hinged, removable induced air grille in four designs



Optional equipment and accessories

  • Control equipment
  • Additional casing for extract air
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC
  • Adjustable air control blades for air directional control
  • With an extended border also suitable for freely suspended installation
  • Top entry spigots
  • Exposed mounting
  • Multi-service option
small_tab1_Serie DID 632
  • APPLICATION
  • DESCRIPTION

Application

  • Active chilled beams of Type DID632 for the integration into various ceiling systems, preferably for room heights up to 4.0 m
  • Particularly suitable for grid ceilings with grid size 600
  • Adjustable air control blades (optional) allow for the manual adjustment of the air discharge direction
  • 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
  • Energy-efficient solution since water is used as a medium for heating and cooling


Special characteristics

  • Adjustable air control blades for air direction control
  • Hinged, removable induced air grille in four designs
  • Horizontal heat exchanger as 2-pipe or 4-pipe system
  • Internal nozzle plate with punched nozzles (non-combustible)
  • Water connections at the narrow side, Ø15 mm Cu pipe

Variants

  • DID632-LR: With induced air grille – perforated sheet metal, circular holes
  • DID632-LQ: With induced air grille – perforated sheet metal, square holes
  • DID632-GL: With induced air grille – longitudinal blades
  • DID632-GQ: With induced air grille – transverse blades


Construction

  • P3: RAL9010, gloss level 20%
  • P2: RAL9005, gloss level 25%
  • P6: Any other colour


Attachments

  • Extract air spigot (45° connection) for supply and extract air combination
  • Adjustable air control blades


Useful additions

  • Connecting hoses
  • Control equipment consisting of a control panel including a controller with integral room temperature sensor; valves and valve actuators; and lockshields
  • X-AIRCONTROL control system


Construction features

  • Spigot is suitable for circular ducts to EN 1506 or EN 13180
  • Four suspension points for on-site installation (by others)
  • Four nozzle variants to optimise induction based on demand
  • Optional additional casing with extract air spigot (45deg connection)
  • Optional adjustable air control blades for air direction control (retrofit at a later stage is not possible)


Materials and surfaces

  • Casing, front frame, nozzle plate, and perforated induced air grille (LR/LQ) made of galvanised sheet steel
  • Blades of the induced air grille (GL/GQ) made of aluminium sections
  • Heat exchanger with copper tubes and aluminium fins
  • Exposed surfaces are powder-coated pure white (RAL 9010) or in any other RAL colour
  • Heat exchanger also in black (RAL 9005)
  • Extract air spigot made of galvanised sheet steel
  • Air control blades made of polypropylene, UL 94, flame retardant (V0)

Technical information

  • FUNCTION
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE
did632

Functional description

Active chilled beams provide centrally conditioned primary air (fresh air) to the room and use heat exchangers for additional cooling and/or heating.

The primary air is discharged through nozzles (available in 4 sizes) into the mixing chambers; as a result of this, secondary air (room air) is induced via the induced air grille and passes through the horizontal heat exchanger, where it is heated or cooled.

Primary and secondary air mix and are then supplied to the room horizontally through the supply air slots.

Active chilled beams of Type DID632, with two-way air discharge and high thermal output, providing high thermal comfort levels.

For installation flush with the ceiling, preferably in rooms with a height up to 4.0 m.

The units consist of a casing with suspension points, a spigot, non-combustible nozzles, and a horizontal heat exchanger.

Nozzles in four sizes to optimise induction based on demand.

Special characteristics

  • Adjustable air control blades for air direction control
  • Hinged, removable induced air grille in four designs
  • Horizontal heat exchanger as 2-pipe or 4-pipe system
  • Water connections at the narrow side, Ø15 mm Cu pipe


Materials and surfaces

  • Casing, front frame, nozzle plate, and perforated induced air grille (LR/LQ) made of galvanised sheet steel
  • Blades of the induced air grille (GL/GQ) made of aluminium sections
  • Heat exchanger with copper tubes and aluminium fins
  • Exposed surfaces are powder-coated pure white (RAL 9010) or in any other RAL colour
  • Heat exchanger also in black (RAL 9005)
  • Extract air spigot made of galvanised sheet steel
  • Air control blades made of polypropylene, UL 94, flame retardant (V0)


Construction

  • P3: RAL9010, gloss level 20%
  • P2: RAL9005, gloss level 25%
  • P6: Any other colour


Technical data

  • Nominal length: 900, 1200, 1500, 1800, 2100, 2400, 2700, 3000 mm
  • Length: 893 – 3000 mm
  • Height: 210 mm
  • Width: 593, 598 mm
  • Primary air spigot, diameter: 123/158 mm
  • Primary air volume flow rate: 6 – 85 l/s, 22 – 306 m³/h
  • Cooling capacity: up to 2450 W
  • Heating capacity: up to 2970 W
  • Max. operating pressure: 16 bar
  • Max. operating temperature: 75 °C

References

Installation example DID 632

slide_1
slide_2
slide_3
  • Product Information

Type DID 632
Active chilled beam with two-way air discharge and horizontal heat exchanger, suitable for grid ceilings with grid size 600 or 625

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Four nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Adjustable air control blades to control the airflow
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS



For further product information please click here

Installation example DID-R

slide_1
slide_2
slide_3
  • Product Information

Type DID-R
Active chilled diffuser with radial air discharge, 600 or 625 mm nominal width, vertical heat exchanger and condensate drip tray

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.

  • Preferably for room heights up to 4.00 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Circular or square diffuser face


Optional equipment and accessories

  • Control system
  • Casing coated black
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC


For further product information please click here


Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051