TYPE AP

Return air grilles, with aluminium border and fixed perforated steel core

Single return air grilles

  • Nominal sizes: AP/ RC-AP 150 × 100 – 1200 × 600 mm, APL 595 x 595, 1195 x 1195 mm
  • Volume flow rate maximum 1310 l/s or 4716 m³/h
  • Grille face made of aluminium with powder-coat finish
  • Front border, 30mm wide
  • Visible screw fixing as standard

Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for opposed blade action volume control
  • Screw fix border and border without punching available
  • Optional subframe for secret fixing

APPLICATION

Application

  • Ventilation grille of Type AP as extract air variant for comfort zones and industrial zones
  • Steel perforated core
  • For variable and constant volume flows
  • For installation in walls, ceilings and rectangular ducts


Special characteristics

  • Steel perforated core
  • Rectangular front border
  • Countersunk holes


Nominal sizes

AP

  • Nominal length: 150 mm up to 1200 mm (25 mm increments)
  • Nominal height: 100 mm up to 600 mm (25 mm increments)
  • Intermediate and larger sizes on request


APL

  • Nominal sizes: 595 x 595 to 1195 x 1195 mm
  • Intermediate sizes upon request


RC-AP

  • Nominal length: 150 mm up to 1200 mm (25 mm increments)
  • Nominal height: 100 mm up to 600 mm (25 mm increments)
  • Intermediate sizes upon request

DESCRIPTION

Variants

  • AP: Single grille
  • APL: Lay in ceiling tile replacement
  • RC-AP: Single grille with removable core


Front Border

  • AP: 30 mm wide
  • APL: 17.5mm wide
  • RC-AP: 39 mm wide


Fixing:

  • 0: Countersunk holes
  • X: Without holes (border drilling by customer)
  • S11: Concealed fixings (in combination with installation subframe)


Parts and characteristics

  • Rectangular profile border sections
  • Fixed perforated core
  • Factory fitted perimeter seal


Attachments

  • AG: for volume flow control
  • G4 Filter; FMR-G4-C15 22mm thick chemical fibre medium. Average arrestance according to EN779-90%


Accessories

  • Installation subframe. For the fast and simple installation of ventilation grilles


Construction features

  • 30 mm wide border
  • Fixed facia perforated core


Materials and surfaces

  • Border and core made of aluminium
  • P3: Border and blades powder-coated, RAL9010:20%
  • P6: Powder-coated RAL CLASSIC colour. Gloss level 30%


Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135


Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022
  • It is recommended to inspect and, if necessary, clean or replace the filter every three months. 

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

  • Function
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE 

Functional description

Ventilation grilles are air terminal devices for the supply air and extract air of ventilation and air conditioning systems. They direct the supply air into the room. Ventilation grilles with adjustable blades allow for adapting the discharge direction to the local conditions. The result is a mixed flow ventilation in comfort zones and industrial zones, with good overall room ventilation.

Induction slows the airflow down, i.e. the airflow velocity decreases as the distance from the grille increases. The distance at which the airflow velocity reaches a certain defined value, e.g. 0.2 m/s, is called throw distance. The supply air jet from wall grilles that are installed near the ceiling achieves a larger throw distance than a free jet (from a grille that is not installed near the ceiling). Single grilles, groups of grilles and continuous horizontal runs all achieve different throw distances.

In cooling mode it is necessary to take account of the jet deviation towards the occupied zone, which increases as the supply air to room air temperature difference increases and the discharge velocity decreases. In heating mode the supply air jet deviates towards the ceiling. This has no negative effect on the airflow velocity in the occupied zone, but it may affect the complete ventilation of the room.


Ventilation grilles, rectangular, made of aluminium, for supply and extract air.
Rectangular profile border.
Preferably for wall and ceiling installation but also suitable for rectangular ducts.
Ready-to-install component which consists of a border and fixed horizontal blades.
Countersunk holes for fixing onto an installation surface.
Sound power level of the air-regenerated noise measured according to EN ISO 5135.

Special characteristics

  • Perforated steel core
  • Front border
  • Countersunk holes


Materials and surfaces

  • Border and blades made of aluminium
  • P3: Border and blades powder coat RAL9010:20%
  • P6: Powder coated RAL CLASSIC colour. Gloss level 30%


Technical data

Nominal sizes:
AP, RC-P 150 x 100 to 1200 x 600 mm 
APL 595 x 595, 1195 x 1195 mm

Maximum volume flow rate (extract air): 1310 l/s or 4716 m³/h at LWA max. 40 dB(A) without attachments:

Sizing data

V _______________________ [m³/h]
Δpt _______________________ [Pa]
Air-regenerated noise LWA _______________________ [dB(A)]

Dimensions and weight, Product details

  • DIMENSIONS AND WEIGHT
  • PRODUCT DETAILS

Installation details, Basic information and nomenclature

  • INSTALLATION DETAILS
  • BASIC INFORMATION AND NOMENCLATURE

Principal dimensions

L [mm]
Nominal length of the ventilation grille

H [mm]
Nominal height of the ventilation grille

m [kg]
Weight


Nomenclature

LWA [dB(A)]
Sound power level of the air-regenerated noise

V [m³/h] and [l/s]
Volume flow rate

Δpt [Pa]
Total differential pressure


Downloads

product information

certificates

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051