Ceiling diffusers

layer

DLK-Fb

Square ceiling diffusers for Odenwald false ceilings, to ensure fire integrity in the event of a fire on the room side

  • Nominal sizes 600, 625
  • Volume flow rate range 220 – 460 l/s or 792 – 1656 m³/h
  • Square diffuser face
  • Diffuser face made of galvanised sheet steel, powder-coated
  • Automatic release at 72 °C in the event of a fire
  • For supply and extract air
  • For variable and constant volume flows
  • High induction results in a rapid reduction of the temperature difference and airflow velocity


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal duct connection

read more

layer

VDR

Circular ceiling diffusers, with manual or motorised adjustment of the air discharge direction, particularly suitable for high rooms

  • Nominal sizes 315, 400, 630, 800
  • Volume flow rate range 175 – 1495 l/s or 630 – 5382 m³/h
  • Diffuser face made of aluminium
  • For supply air
  • For variable and constant volume flows
  • Discharge direction can be adjusted manually or with an actuator
  • High penetration of air at low sound power level


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Actuators for adjusting the air discharge direction

read more

layer

DLQ

Square ceiling diffusers

  • Nominal sizes 250, 300, 400, 500, 600, 625
  • Volume flow rate range 20 – 700 l/s or 72 – 2520 m³/h
  • Square diffuser face
  • Diffuser face made of sheet steel, powder-coated
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems
  • High induction results in a rapid reduction of the temperature difference and airflow velocity


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Blanking plates for adjusting the discharge direction
  • Duct cross bar for installation without plenum box
  • Plenum box with cord-operated damper blade and pressure tap

read more

layer

Type ADLQL

Type ADLQL ceiling diffusers are ideal for flush installation in tiled ceilings. They are recommended for room heights of between 2.60m and 4.00m.

They are characterised by high induction, which results in rapid decay of supply air velocity and temperature differential.

The recommended supply air temperature differential range is +10K.

read more

layer

Type ADT


Square ceiling diffusers

  • Nominal sizes 150, 225, 300, 375, 450, 525, 600 mm
  • Volume flow rate range 25 - 681 l/s or 90 - 2450 m3/h
  • Square diffuser face
  • Diffuser face made of aluminium with powder-coat finish
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems
  • High induction results in a rapid reduction of temperature differences and airflow velocities


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Blanking plates for adjusting the discharge direction
  • Plenum box with cord-operated damper blade and pressure tap







read more

layer

ADLQ

Square ceiling diffusers

  • Nominal sizes 250, 300, 400, 500, 600, 625
  • Volume flow rate range 20 – 665 l/s or 72 – 2394 m³/h
  • Square diffuser face
  • Diffuser face made of aluminium with anodised finish
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems
  • High induction results in a rapid reduction of the temperature difference and airflow velocity


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Blanking plates for adjusting the discharge direction
  • Duct cross bar for installation without plenum box
  • Plenum box with cord-operated damper blade and pressure tap

read more

layer

DLQL

Square ceiling diffusers

  • Nominal sizes 250, 300, 400, 500, 600
  • Volume flow rate range 6 – 285 l/s or 22 – 1026 m³/h
  • Square diffuser face
  • Diffuser face made of galvanised sheet steel, powder-coated
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems
  • Perforated diffuser face with special baffle element for horizontal air discharge and high induction levels


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Blanking plates for adjusting the discharge direction
  • Plenum box with damper blade

read more

layer

Type LFP

The Laminar Flow Panel type LFP has been developed for specialist applications where the mixing of supply air with room air must be avoided. The diffuser provides a stable, low turbulence vertical discharge into the occupied zone. This makes the TROX type LFP ideal for clean rooms,
labratories, operating theatres, broadcasting studios and computer rooms.

read more

layer

ADLR

Circular and square ceiling diffusers for radial air discharge, for high comfort levels, ideal integration into suspended ceilings

  • Nominal sizes 1, 2, 3, 4, 5, 6, 7, 8
  • Volume flow rate range 20 – 650 l/s or 72 – 2340 m³/h
  • Circular or square diffuser face
  • Diffuser face made of aluminium with anodised finish
  • For supply and extract air
  • For variable and constant volume flows
  • For suspended continuous plasterboard or grid ceilings
  • High induction results in a rapid reduction of the temperature difference and airflow velocity


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal or vertical duct connection
  • Plenum box with cord-operated damper blade and pressure tap

read more

layer

DLQ-AK

Square ceiling diffusers

  • Nominal sizes 300, 400, 500, 600, 625
  • Volume flow rate range 40 – 565 l/s or 144 – 2034 m³/h
  • Square diffuser face
  • Diffuser face made of galvanised sheet steel, powder-coated
  • For supply air
  • For variable and constant volume flows
  • For all types of ceiling systems
  • High induction results in a rapid reduction of the temperature difference and airflow velocity


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Horizontal duct connection
  • Plenum box with damper blade

read more

layer

Type ADM

The TROX Linear Diffuser type ADM is a single or two way finite or coninuous line aluminium diffuser. Attractively designed and mainly suitable for installation into flat false ceilings and provides one or two way horizontal discharge.

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +44 (0)1842 754545 | Fax: +44 (0)1842 763051